/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define FC_TARGET_MCU STM32F405
#define BOARD_NAME GEPRC_TAKER_F405AIO
#define MANUFACTURER_ID GEPR
#define USE_ACC
#define USE_ACC_SPI_ICM42688P
#define USE_GYRO
#define USE_GYRO_SPI_ICM42688P
#define USE_BARO
#define USE_BARO_DPS310
#define USE_FLASH
#define USE_FLASH_W25Q128FV
#define USE_MAX7456
#define USE_GYRO_CLKIN
#define BEEPER_PIN PD7
#define MOTOR1_PIN PE9
#define MOTOR2_PIN PE11
#define MOTOR3_PIN PE13
#define MOTOR4_PIN PE14
#define RX_PPM_PIN PA3
#define LED_STRIP_PIN PD14
#define UART1_TX_PIN PA9
#define UART2_TX_PIN PD5
#define UART3_TX_PIN PC10
#define UART4_TX_PIN PA0
#define UART5_TX_PIN PC12
#define UART6_TX_PIN PC6
#define UART1_RX_PIN PA10
#define UART2_RX_PIN PD6
#define UART3_RX_PIN PC11
#define UART4_RX_PIN PA1
#define UART5_RX_PIN PD2
#define UART6_RX_PIN PC7
#define I2C1_SCL_PIN PB8
#define I2C2_SCL_PIN PB10
#define I2C1_SDA_PIN PB9
#define I2C2_SDA_PIN PB11
#define LED0_PIN PD15
#define SPI1_SCK_PIN PA5
#define SPI2_SCK_PIN PB13
#define SPI3_SCK_PIN PB3
#define SPI1_SDI_PIN PA6
#define SPI2_SDI_PIN PB14
#define SPI3_SDI_PIN PB4
#define SPI1_SDO_PIN PA7
#define SPI2_SDO_PIN PB15
#define SPI3_SDO_PIN PB5
#define ADC_VBAT_PIN PC3
#define ADC_CURR_PIN PC2
#define PINIO1_PIN PC14 // USER1
#define PINIO2_PIN PC13 // VTX-SW
#define FLASH_CS_PIN PB6
#define MAX7456_SPI_CS_PIN PB12
#define GYRO_1_EXTI_PIN PB0
#define GYRO_1_CS_PIN PA4
#define GYRO_1_CLKIN_PIN PB1
#define USB_DETECT_PIN PE8
#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 0, PE9 , 1, 2) \
TIMER_PIN_MAP( 1, PE11, 1, 1) \
TIMER_PIN_MAP( 2, PE13, 1, 1) \
TIMER_PIN_MAP( 3, PE14, 1, 0) \
TIMER_PIN_MAP( 4, PA3 , 3, -1) \
TIMER_PIN_MAP( 5, PD14, 1, 0) \
TIMER_PIN_MAP( 6, PB1 , 2, -1)
#define ADC3_DMA_OPT 1
#define ADC_INSTANCE ADC3
#define BARO_I2C_INSTANCE I2CDEV_1
#define MAG_I2C_INSTANCE I2CDEV_2
#define PINIO1_BOX 40
#define PINIO1_CONFIG 1
#define PINIO2_BOX 41
#define PINIO2_CONFIG 129
#define BOX_USER2_NAME "VTX-SW"
#define SERIALRX_UART SERIAL_PORT_USART2 // Built-in ELRS receiver on UART2
#define SERIALRX_PROVIDER SERIALRX_CRSF
#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_OFF
#define BEEPER_INVERTED
#define SYSTEM_HSE_MHZ 8
#define MAX7456_SPI_INSTANCE SPI2
#define FLASH_SPI_INSTANCE SPI3
#define GYRO_1_SPI_INSTANCE SPI1
#define DEFAULT_ALIGN_BOARD_YAW 45