/*
 * This file is part of Betaflight.
 *
 * Betaflight is free software. You can redistribute this software
 * and/or modify this software under the terms of the GNU General
 * Public License as published by the Free Software Foundation,
 * either version 3 of the License, or (at your option) any later
 * version.
 *
 * Betaflight is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 *
 * See the GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public
 * License along with this software.
 *
 * If not, see <http://www.gnu.org/licenses/>.
 */
#pragma once

#define FC_TARGET_MCU STM32H743
#define BOARD_NAME SEQUREH7V2
#define MANUFACTURER_ID SQRE

#define USE_ACC
#define USE_ACC_SPI_ICM42688P

#define USE_GYRO
#define USE_GYRO_SPI_ICM42688P

#define USE_BARO
#define USE_BARO_BMP280
#define USE_BARO_DPS310

#define USE_FLASH
#define USE_FLASH_W25Q128FV

#define USE_MAX7456

#ifndef USE_CAMERA_CONTROL
#define USE_CAMERA_CONTROL
#endif

#define BEEPER_PIN PD15

#define MOTOR1_PIN PB4
#define MOTOR2_PIN PB5
#define MOTOR3_PIN PB0
#define MOTOR4_PIN PB1
#define MOTOR5_PIN PB6
#define MOTOR6_PIN PB7
#define MOTOR7_PIN PB10
#define MOTOR8_PIN PB11

#define LED_STRIP_PIN PA8

#define UART1_TX_PIN PA9
#define UART1_RX_PIN PA10

#define UART2_TX_PIN PA2
#define UART2_RX_PIN PA3

#define UART4_TX_PIN PA0
#define UART4_RX_PIN PA1

#define UART6_TX_PIN PC6
#define UART6_RX_PIN PC7

#define UART7_TX_PIN PE8
#define UART7_RX_PIN PE7

#define UART8_RX_PIN PE0

#define I2C1_SCL_PIN PB8
#define I2C1_SDA_PIN PB9

#define LED0_PIN PC13

#define SPI1_SCK_PIN PA5
#define SPI1_SDI_PIN PA6
#define SPI1_SDO_PIN PA7

#define SPI2_SCK_PIN PB13
#define SPI2_SDI_PIN PB14
#define SPI2_SDO_PIN PB15

#define SPI3_SCK_PIN PC10
#define SPI3_SDI_PIN PC11
#define SPI3_SDO_PIN PC12

#define ADC_VBAT_PIN PC3
#define ADC_CURR_PIN PC2

#define CAMERA_CONTROL_PIN PB3

#define FLASH_CS_PIN PA15

#define MAX7456_SPI_CS_PIN PA4

#define GYRO_1_EXTI_PIN PD0
#define GYRO_1_CS_PIN PB12

#define TIMER_PIN_MAPPING \
    TIMER_PIN_MAP( 0, PB4,  1,  0 ) \
    TIMER_PIN_MAP( 1, PB5,  1,  0 ) \
    TIMER_PIN_MAP( 2, PB0,  2,  0 ) \
    TIMER_PIN_MAP( 3, PB1,  2,  0 ) \
    TIMER_PIN_MAP( 4, PB6,  2,  0 ) \
    TIMER_PIN_MAP( 5, PB7,  2,  0 ) \
    TIMER_PIN_MAP( 6, PB10, 1,  0 ) \
    TIMER_PIN_MAP( 7, PB11, 1,  0 ) \
    TIMER_PIN_MAP( 8, PA8,  1,  0 ) \
    TIMER_PIN_MAP( 9, PB3,  1, -1 ) 

#define ADC1_DMA_OPT        8
#define ADC3_DMA_OPT        9

#define TIMUP1_DMA_OPT      0
#define TIMUP2_DMA_OPT      0
#define TIMUP3_DMA_OPT      0
#define TIMUP4_DMA_OPT      0
#define TIMUP8_DMA_OPT      0

#define ADC_INSTANCE ADC1

#define SERIALRX_UART SERIAL_PORT_USART1
#define GPS_UART SERIAL_PORT_USART6
#define MSP_DISPLAYPORT_UART SERIAL_PORT_USART7
#define ESC_SENSOR_UART SERIAL_PORT_USART8

#define BARO_I2C_INSTANCE I2CDEV_1
#define MAG_I2C_INSTANCE I2CDEV_1

#define FLASH_SPI_INSTANCE SPI3
#define GYRO_1_SPI_INSTANCE SPI2
#define MAX7456_SPI_INSTANCE SPI1

#define DEFAULT_DSHOT_BURST DSHOT_DMAR_ON
#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_CURRENT_METER_SCALE 1052
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define DEFAULT_VOLTAGE_METER_SCALE 110

#define BEEPER_INVERTED

#define GYRO_1_ALIGN CW90_DEG